1. Inspect the Sand Blast Hose Thoroughly Before Use
Check the sand blast hose for cracks, leaks, or fraying every time you start work. Look closely at fittings and couplings as loose connections cause pressure bursts. Replace any damaged sand blast hose immediately; never patch it temporarily. Ensure the hose’s material matches your blasting media to avoid premature wear.
2. Use Proper Pressure and Flow Control
Set the blasting pressure according to the sand blast hose’s specifications. Excess pressure strains the hose and increases rupture risks. Use a pressure regulator to maintain steady flow. Because fluctuations weaken the hose over time. Never exceed the manufacturer’s recommended PSI for your sand blast hose model.
3. Wear Full Protective Gear
Sand blast hoses propel high-velocity media, so safety gear is non-negotiable. Wear a blast helmet with a face shield to shield eyes and lungs from debris. Use thick gloves, long sleeves, and steel-toe boots to protect skin and feet. A respirator filters harmful dust from abrasive materials.
4. Handle the Sand Blast Hose Carefully
Avoid dragging the sand blast hose over sharp edges or rough surfaces. Because this damages the outer layer. Keep the hose away from heat sources to prevent material degradation. When moving, lift the hose instead of yanking it; sudden pulls stress fittings.
5. Shut Down and Store Correctly
After use, relieve pressure from the sand blast hose before disconnecting it. Drain any remaining media to prevent clogs. Store the hose in a cool, dry area—coil it loosely to avoid kinks. Inspect it again post-use to catch minor damage early.